 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
2008 • 2009 • 2010 • 2011• 2012
January/february
Advanced Rod Lock Cylinder Technology Enhances Plant Safety Quotient
By Rade Knezevic and Karl Hay, Parker Hannifin Corporation
Aluminum Pneumatic Cylinders Gain New Acceptance Over Steel In Sawmill Equipment
By Bosch Rexroth Corporation
Systems Integrator Directory
Data Loggers Help Compress Energy Costs
By Onset Computer Corporation
Multi-Axis Motion Control Enables Smooth Motion for Stretch Press
By Rick Meyerhoefer, Regional Applications Specialist, Delta Computer Systems, Inc.
March/April
Rugged LDT Cuts Waste And Downtime In Wood Machining Operation
The Practice of Tube Coating to Extend Equipment Life and Enhance Production Output
By Ed Curran, CEO, Curran International
Off Highway Directory
Distinguishing the Difference Between a Metal O.D. and Rubber-Covered Seal
By Stephen Maloney, Colonial Seal Company, Gloucester City, NJ
Fluid Power Success Story: Wheel Motors Enhance Performance of Sweepers
By Poclain Hydraulics
Hydraulic-Powered Seismic Shaking Table: Testing CFRP-Based Energy Dissipation in Bridge Columns
Redesigned Landscape Loader Offers More Versatility for Users
By John Deere, Worldwide Construction & Forestry Division
May/June
Electronic Control for Hydraulic Applications
By Andrew J. Smith, Strategic Marketing Manager, and Brian Van Batavia, Senior Software Engineer, Eaton Hydraulics, Inc.
How to Deal with Pre-Charged Loss in Bladder Accumulators Due to Gas Permeation
By Ed Godin, Technical Services Manager, and Dave Broad, Chemist, Parker Hannifin Corp., Hydraulic Accumulator Division
Scientific Software Brings Fast Simulations to Engineers and Scientists
By COMSOL, Inc.
July/August
Advanced Hydraulic Valves Offer Rock-Solid Stability
By Hawe Hydraulics
Home to Roost: Sealing Alternatives Control Leakage for Valve Manufacturer in Offshore Industry
By Trelleborg Sealing Solutions
Maximize Plant Efficiency through Lubrication Knowledge, Oil Analysis and Supplier Experience
Manufacturers Directory
Efficient Engineering Through Simulation of CAN-Based Control Systems
By Johan Strandberg, Mikael Akerholm, Jorgen Hansson, Mats Kjelberg, and Johan Backstrom, CC Systems AB
Ice Cold: Vacuum Suction Cups Provide the Right Hold in One of the Most Advanced Ski Service Stations Available
By Fipa GMBH
Joint Strike Fighter Aces the Test Using Delta Computer Systems Motion Controller
By Bill Savela, Delta Computer Systems, Inc., and Bill DuBose, Emprise Corp.
Machine Tools: All-Round Solution with Electrohydraulic Linear Axes
By Bosch Rexroth Corporation
This is Vacuum…An Explanation
By Daniel Pascoe, Vacuforce Inc.
September/October
Developing the Ideal Hydraulic Fluid
By Eaton Hydraulics Division
Evaluating the Seals in a Connector
By FasTest, Inc.
The Vacuum Venturi – Explained
By Daniel Pascoe, Vacuforce Inc.
Wide Range Temperature, Pressure, and Fluid Resistant Hydraulic Cylinder Sealing Systems
By Joel Johnson and Ben Westbrook, Simrit Division of Freudenberg-NOK, and Noriyuki Matsui, NOK Corporation
Tech Directory
Focus on Energy
By Dan Helgerson, Cascade Steel Rolling Mills, Inc.
Multi Element Sealing System for Hydraulic Applications to Improve Performance and Service Time Under Highest Loads
by Holger Jordan and Dr. Nils Kohlhase, Trelleborg Sealing Solutions
Under Pressure: Pipe Threads
By Daniel Pascoe, Vacuforce Inc.
November/December
Fairground Rides: Total Thrill
By Bosch Rexroth Corporation
If in Doubt…Flow Controls
By Dan Helgerson, Cascade Steel Rolling Mills, Inc.
Modeling and Simulation Advances in Fluid Power Motion Control Systems
By Peter Nachtwey, Delta Computer Systems, Inc.
Optimized Oil and Fluid Filtration
By Marty Barris, Engineering Director, Donaldson Industrial Hydraulics
The Vacuum Cup – Explained
By Daniel Pascoe, Vacuforce Inc.
Training and Certification Initiatives Prove Fluid Power and Electronics Are Not Mutually Exclusive Career Choices
By Tom Blansett, Manager of Eaton Training Services
<< TOP >>
January/february
CANopen in Fluid Power Valves and Servos
By Reiner Zitzmann, Technical Manager, CAN in Automation
Cylinder Broke? – Don't Go Broke Replacing It
By Mark Cook and Tim Patrick – Yates Industries
Electrohydraulics For Hazardous Environments
By Marco Solbiati, Marketing Dept., Atos SpA
Flow Control: If in Doubt, Think About... Energy
By Dan Helgerson, Cascade Steel Rolling Mills, Inc.
Innovative Solutions for the Fluid Power Industry
By Gerd R. Biller, Buhler Technologies LLC
It's a Dirty Job: Vacuum Filtration
By Daniel Pascoe, Vacuforce Inc.
Systems Integrator Directory
Don't Drop the Ball
By Daniel Pascoe, Vacuforce Inc.
Early Honing Experience of Company President Pays Big Dividend for Hydraulic Valve Supplier
Using Computational Fluid Dynamics (CFD) to Simulate a Cylinder Head Flow Test
By Cody McKinley and John Lumkes, Purdue University
March/April
End of Arm Vacuum
By Daniel Pascoe, Vacuforce Inc.
EU-Ecolable Biohydraulic Oils Present Superior Technical Performance Characteristics
By Dirk Rettemeyer, Markus Scherer, and Ronny Rinklieb, Cognis GmbH
Mathematical Modeling for Pump-Controlled System of Hydraulic Drive Unit of Single Bucket Excavator Digging Mechanism
By Juma Yousuf Alaydi | Assistant Professor, Industrial Eng. Dept., IUG, Palestine
Power Factor
By Dan Helgerson, Cascade Steel Rolling Mills, Inc.
Seals Application Controls Hazardous Leaks at Nuclear Power Plant
By Jim Shackelford, Sales Consultant for Control and Power, Flaretite Seals
Separating Timber Panels with a Separation Vacuum Cup
By FIPA GmbH
Off Highway Directory
A Series Hydraulic Hybrid Drive Train for Off-Road Vehicles
By Peter A.J. Achten, Innas BV
IFPS Certification “Success Story”: Altec Industries
By Willis L. Franke, CFPAI, CFPAJPP, CFPHS, CFPIHT, CFPMHT, CFPMM Altec Technical Training Manager (Retired)
New Reach Trucks Take Shape With Preformed Hose
By Eaton Corporation
Power Factor...An Opportunity
By Dan Helgerson, Cascade Steel Rolling Mills, Inc.
May/June
Accumulators: Energy Savers/ Energy Wasters
By Dan Helgerson, Cascade Steel Rolling Mills, Inc.
Clean Hydraulics – The Basics
By Barbara Kanegsberg and Ed Kanegsberg, BFK Solutions LLC
Fluid Control in Wind Turbines
By G.R. Biller, Buhler Technologies, LLC
IFPS Certification “Success Story”: SMC Corporation
(Re)Invent Your Sales: Back to Basics
By Daniel Pascoe, Vacuforce Inc.
July/August
Battling Neptune
By Mark Cook and Tim Patrick – Yates Industries
IFPS Certification “Success Story”: American Electric Power
LVDTs Gain Strength as Reliable, Long-term Feedback Devices in Off shore Applications
By Joseph Vu, Application Engineer, Macro Sensors
Rotary Vane Vacuum Pumps
By Daniel Pascoe, Vacuforce Inc.
Manufacturers Directory
Avoiding and Eliminating Leaks in the Automotive Industry
By Prof. Dr.-Ing. Peter Groche, VOSS Fluid GmbH
Hydraulic Controls Ensure That Helicopter Parts Pass the Test
By Bill Savela, Delta Computer Systems, Inc.
Mission Impossible: Designing a System That Can Go Into Space
By FUTEK Advanced Sensor Technology, Inc.
September/October
Efficient Hydraulic Systems
By Dan Helgerson, Cascade Steel Rolling Mills, Inc.
Electric Screw Actuators Improve Accuracy and Productivity of Modular Bagging System
By Tolomatic, Inc.
IFPS Certification Success Story: Terex Utilities
Improved Filter Elements Provide a New Chapter in Hydraulic Filtration
By ARGO-HYTOS, Inc.
Leak-Free Seals Help the Refrigeration Industry Go Green
By Vito Accetta, Flaretite Inc.
Tech Directory
Hydraulic Shock: How It’s Generated and Suppressed
By Ed Godin, Technical Services Manager, Global Accumulator Division, Parker Hannifin Corporation
Improving Press Velocity Control and Performance Data Logging
By Kadant AES, a division of Kadant, Inc.
The Containment Shell: The Facts & Future
By Dr. Nicolas Weibel, Ph.D., Director and Senior Scientist, Greene, Tweed & Co.
November/December
Achieving a Greener Environment with Restored Hydraulic Equipment
By P.K. Guha, Attica Hydraulic Exchange Corporation
New Hydraulic Theaters Deliver the Latest in Special Effects
By Bill Savela, Delta Computer Systems, Inc.
Regenerative Blowers
By Daniel Pascoe, Vacuforce Inc.
<< TOP >>
January/February
Cylinders Solve Tough Foundry Application Problems
By Brent Paterson, President, Peninsular Cylinder Company
I Have a Vacuum Application...
By Daniel Pascoe, Vacuforce Inc.
Reducing Pressure: A Way to Save or Waste Energy?
By Dan Helgerson, Cascade Steel Rolling Mills, Inc.
Systems Integrator Directory
Looking for the Right Connection
By Faster, Inc.
Systems Integrator: An Energy Challenge
By Dan Helgerson, Cascade Steel Rolling Mills, Inc.
The Many Faces of a Compressed Air Audit
By Hank van Ormer, Air Power USA, Inc.
March/April
An Examination of Unified Two- and Four-Bolt Flange AdaptersBy David Albrecht, Jr., Adaconn®
New Hydrostatic Pump Series Offers Better Efficiency for Sewer Cleaning Machines
Systems Integrators Energy Challenge: Follow Up
By Dan Helgerson, Cascade Steel Rolling Mills, Inc.
The Impact of Climate on Hydraulic Equipment
By Brendan Casey
Universal Vacuum Tooling
By Daniel Pascoe, Vacuforce Inc.
Off-Highway Directory
Fluid Power Technology Prevalent in Mining Applications
By Justin Sergeant, Open Loop Energy, Inc.; Gary Gotting, High Country Tek, Inc.; and Ryley Karl,
Caterpillar, Inc.
Innovative Pumps Delivers a New Chapter in Hydraulic Engineering
By Brian Hageman, Deluge, Inc.
Selection Criteria for Flat-Face Couplings in Earth-Moving & Construction Applications
By Mauro Rambaldini, Faster SpA, and Matthew Mulder, Faster, Inc.
Systems Integrators Challenge: The Pneumatic Solution
By Dan Helgerson, Cascade Steel Rolling Mills, Inc.
The Problem with the Next “Advance” in Off-Highway Hydraulics
By Brendan Casey
May/June
CFD Aided Design of Valves & Pumps
By Sam Lowry, PhD, President, and Zhemin Wu, PhD, Research Engineer, Simerics, Inc.
Energy Challenge: The Hydraulic Solution
By Dan Helgerson, Cascade Steel Rolling Mills, Inc.
Testing and Qualification of Pressure Sensors for Use in Hydrogen Applications
By Karmjit S. Sidhu, Vice President, Business Development, American Sensor Technologies
The Demand for High Speed Efficient Solutions: USB Technology
By Futek Advanced Sensor Technology, Inc.
The Looming Efficiency Imperative
By Brendan Casey
This is Vacuum: Units of Measurement
By Daniel Pascoe, Vacuforce Inc.
July/August
Fluid Power a Critical Factor in Offshore Engineering
By Rance Herren, CFPS, National Oilwell Varco
How to Avoid a Lawsuit
By Brendan Casey
Sophisticated Fluid Analysis Program Helps Users Extend Life of Their Hydraulic Systems
By Wasan Shaffou, Eaton's Vickers Fluid Analysis Service
Special Considerations for the Selection and Use of Pneumatic and Hydraulic Actuators for Marine Applications
By Walter F. Stridick, Sales & Application Specialist, and Noel Laukaitis, Engineering Manager, Lehigh Fluid Power, Inc.
Understanding the Hydraulic Vane Pump: Part 1
By P.K. Guha, Attica Hydraulic Exchange Corp.
Manufacturers Directory
Active Load Abort Systems Enhanced Protection for Valuable Aerospace Test Articles
By Arlin Nelson, MTS Systems Corporation
A Failed Experiment
By Dan Helgerson, Cascade Steel Rolling Mills, Inc.
Safety Requirements are Everywhere—and for Everyone!
By Elizabeth Rehfus, CFPE, CFPS, and IFPS Past President
The Importance of Hydrostatic Balance in Hydraulic Component Design…And Service Life
By Brendan Casey
Understanding the Hydraulic Vane Pump: Part
2
By P.K. Guha, Attica Hydraulic Exchange Corp.
September/october
Diagnosing and Correcting Dieseling Seal Failure
By Hercules Sealing Products
Intelligent Hydraulics Make Plastic Sheet Extrusion Faster, Simpler, and Safer – and Smarter
By Bosch Rexroth Corporation
Maximum Recommended Compressed Air Flow in Pipes
By John F. Berninger, Parker Hannifin
Press Loading with Vacuum
By Daniel Pascoe, Vacuforce Inc.
Something is Missing: Using Alternative Energy
By Dan Helgerson, Cascade Steel Rolling Mills, Inc.
The Pressure-Flow Conundrum
By Brendan Casey
tech directory
I Know, It Hertz
By Dan Helgerson, Cascade Steel Rolling Mills, Inc.
The Perfect Hydraulic Fluid
By Brendan Casey
To Lube or Not To Lube
By Richard F. Bullers, Senior Applications Engineer, SMC Corporation of America
november/december
Pneumatic Theatrical Kits Fill Need for Low-Budget, High-Impact Special Effects
By Mickey Henry, Norcostco
Six-Axis Motion Simulator Gives Realistic Ride Courtesy of Smooth Electrohydraulic Controls
By Peter Nachtwey, Delta Computer Systems, Inc.
The Perfect Hydraulic Fluid: Part 2
By Brendan Casey
Vacuum Clamping
By Daniel Pascoe, Vacuforce Inc.
What in the World Do Those Numbers in the ISO Cleanliness Code Mean?
By Dan Helgerson, Cascade Steel Rolling Mills, Inc.
<< TOP >>
January/February
An Introduction to Slip-In Cartridge Valves: Part 1
By Jim Popovich
Another Way to Increase Hydraulic System Efficiency
By Brendan Casey
Evaluating Hydrostatic Transmission System Pumps for High Horsepower, Heavy-Duty Closed Circuit Applications
By Dave Ebert, Product Manager, Parker Hannifin Corporation, Hydraulic Pump Division
Use It or Lose It
By Dan Helgerson, Cascade Steel Rolling Mills, Inc.
Vacuum Law
By Daniel Pascoe, Vacuforce Inc.
Systems Integrator Directory
A Brief History of Safety in the American Mining Industry
By Justin Sergeant, Open Loop Energy, Inc.
A New Tool for Solving an Old Problem
By Brendan Casey
An Introduction to Slip-In Cartridge Valves: Part 2
By Jim Popovich
High Vacuum
By Daniel Pascoe, Vacuforce Inc.
The Next Level in Wireless Mobile Hydraulic Control – Innovations in Proportional Crane Control Systems
By Ben Stoller, Manager, Radio Controls, Magnetek, Inc.
You Made the Mess, Now You Clean It Up!
By Dan Helgerson, Cascade Steel Rolling Mills, Inc.
March/April
Innovation, Automation, and Lubrication in the Wood Processing Industry
By Tom Kreher, Applied Pneumatic Controls, Inc.
Linear-Position Sensors Ensure Uniformity, Repeatability in Hot-Dip Galvanizing Application
By MTS Systems Corp, Sensors Division
So You Say You Want to Make a Difference
By Dan Helgerson, Cascade Steel Rolling Mills, Inc.
True or April Fool?
By Brendan Casey
Vacuum Foam
By Daniel Pascoe, Vacuforce Inc.
Off-Highway Directory
Sheet Handling with Vacuum
By Daniel Pascoe, Vacuforce Inc.
Silicon-on-Sapphire Pressure Transducer for Off-Highway?
The Hydraulic Fluid’s Best Friend
By Brendan Casey
May/June
Don’t Follow The Crowd, Mount Your Hydraulic Pumps…For Life
By Brendan Casey
Energy Saving in Pneumatic Systems
By Jon Jensen, SMC Corporation of America, and 2011 IFPS President
The Manufacturing Predicament: Sector Primed to Surge, Yet Skilled Labor Shortage an Obstacle
By Gerald Shankel, President and CEO, Fabricators & Manufacturers Association, International
Vacuum Measurement
By Daniel Pascoe, Vacuforce Inc.
July/August
Beware of Getting Hosed
By Jamie Vokes, Member of IFPS Chapters 49 and 50
Cycle Rates
By Daniel Pascoe, Vacuforce Inc.
Fluid Power’s Uncertain Future
By Brendan Casey
From Top to Bottom: Polymers for Jack-up Rigs
By Trelleborg Sealing Solutions Americas
High-Velocity Oxygen Fuel (HVOF) Coating Provides Better Wear and Corrosion Resistance than Chrome Plating
By Applied Industrial Technologies
Hydraulic Hose That Tells You When It’s About to Fail Isn’t Science Fiction Anymore
By Scott Smith, Senior Engineer, Eaton Hydraulics
Manufacturers Directory
Electro-Hydraulic Motion Controllers Emulate Real-World Conditions for Aircraft Component Testing
By Brad Smith, Delta Computer Systems, Inc., and Cullan Aoki, Triumph Aerospace, Inc.
Handling Large Loads: Part 1
By Daniel Pascoe, Vacuforce Inc.
Hydraulic Oil vs. Seal Lip Material
By George Barbin, Marketing Manager, Colonial Seal Co.
Oil Smoke: Centralized Lubrication for Pneumatic Automation
By Clayton W. Fryer, Compressed Air Specialist & Consultant, Applied Pneumatic Controls, Inc. and FPEF President
What's Your Standby Efficiency?
By Brendan Casey
September/october
Engineered Solutions, Systems Integration
By Wade Parks, Owner, WP Associates
Handling Large Loads: Part 2
By Daniel Pascoe, Vacuforce Inc.
Lubrication Filter Elements, Filter Condition Monitoring for Wind Turbine Gearbox Systems with GW Sensor
Dr. Armin Schmidt, HYDAC Germany and Owen Ferik, HYDAC USA
Performance Enhancement and Efficiency Helps Win the Race
Pressure Sensors Serve as Critical Components in Accurate Operation and Maintenance of Windmills
Pressure Trap: B versus D Lip U-Seals
By Sonny Goldsmith, Territory Manager, Hercules Sealing Products
The Power Efficiency Diamond
By Brendan Casey
tech directory
A Brief Overview of Corrosion-Resistant Piston Rod Coating Technology
By Bilal Said, Chief Engineer, Eaton Corporation
How Much Coal Does That Valve Burn?
By Richard F. Bullers, Senior Applications Engineer, SMC Corporation of America
The Little Leaks that Keep Men Poor
By Brendan Casey
november/december
Basic Vacuum Cup Selection
By Daniel Pascoe, Vacuforce Inc.
Burr Identification and Removal
By George Barbin, Marketing Manager, Colonial Seal Company
Continuum® Pump for Workplace Noise Reduction
By Agostino Martini, Settima
Diesel Hydraulic Control Combines Diesel Engine and Hydraulics Control
By Bosch Rexroth
How to Keep Tabs on a Hydraulic Machine’s “Vital Signs”
By Brendan Casey
Hydraulic Products and the Replacement Market
By P.K. Guha
Precise Hydraulic Controls Help Create Spectacular Special Effects for the World's Largest Underwater Moveable Stage
By Matt Schoenbachler, Comoso, and Dennis Ritola, Delta Computer Systems, Inc.
What Not To Do When Designing or Retrofitting an Automatic Conveyor Chain Pin Oiling System
By Wade Parks, WP Associates
<< TOP >>
January/February
Contamination: How Its "CURE" Can Be Worse Than The Disease
By Brendan Casey
Hydraulic Cylinders Reconditioned Quickly and Efficiently with Low-Cost Honing System
Low Vacuum, High Flow
By Daniel Pascoe, Vacuforce Inc.
Selecting An Automatic Lube System: Injector, Single Line, Or Dual Line
By Wade Parks, WP Associates
Why The Cylinder Moves Slowly
By Mikel Janitz, Muncie Power products
systems integrator directory
Basic Vacuum Conveying
By Daniel Pascoe
Effects of Grease on Rotary Shaft Seals
By Stephen Maloney, Colonial Seal Co.
How to Determine Hydraulic Pump Condition Using Volumetric Efficiency
By Brendan Casey
Improving the Health of U.S.-Based Manufacturing
By Michael L. Huntley, CEM, The RECON Group, a division of Livingston & Haven, Charlotte, N.C.
Vacuum basics
By Richard Throop, CFPAI, Michigan Fluid Circuit Design, LLC.
